Diamond Ranch Panels vertical posts are constructed of 1.5" outside diameter 14 gauge high tensile steel. And the rails are 1" high tensile square tubing turned 45 degrees.
Available sizes are 10 foot lengths. (Measurements are to pin centers).
All Diamond Ranch Panels have five horizontal rails and have 2 rows of vertical flat bar spokes.
Diamond Ranch Panels are 5 feet high and require no posts.
Primary use is in cattle and horse corrals and penning with low pressure.
Another common uses is low cost roping arena perimeter fencing.
All panels are all coated with our unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions.
Call for pricing.

Lemsco Panels are constructed primarily of 1.5" outside diameter 14 gauge high tensile steel.
Available sizes are 6, 8, 10, 12, 14 and 16 foot lengths. (Measurements are to pin centers).
All Lemsco Panels have five horizontal rails and the 6 foot has no spokes and the 8 and 10 foot have 1 row of spokes and the 12, 14 and 16 foot have 2 rows of vertical spokes.
Lemsco Panels are 5 feet high and require no posts.

Primary use is in cattle and horse corrals and penning with low pressure.
Another common use is low cost roping arenas.
All panels are all coated with our unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions.

Call for pricing.

LG4's are constructed of primarily 1.5" outside diameter 14 gauge high tensile steel.
Available sizes are 8, 10 and 12 foot lengths. (Measurements are to pin centers).
All Lemsco G4's have five horizontal rails.
Lemsco G4's are a 5 foot high panel with a 4 foot wide by 5 foot high gate.
The overall clearance is 6 feet 10 inches.
LG4's come with 30 inches of chain attched and a chain latch.
Primary use is for a "man gate" access to pens, corrals or alleys.
All LG4's are all coated with our unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions.
Call for pricing.

L4 GIF's are constructed primarily of 1.5" outside diameter 14 gauge high tensile steel.
Available sizes are 48 inch width.
(Measurements are gate openings - add 1 foot for post centers).
All L4 GIF's have five horizontal rails.
L4 GIF's are a 5 foot high gate with a frame.
The overall clearance is 6 feet 10 inches.
L4 GIF's come with 30 inches of chain attched and a chain latch.
Primary use is for flow control in narrow alleys and access to pens, corrals or alleys.
All L4 GIF's are all coated with our unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions.
Call for pricing.

Lemsco High Pole are constructed of 1.5" outside diameter 14 gauge high tensile steel.
Available sizes are 8, 10 and 12 foot lengths. (Measurements are to pin centers).
Lemsco High Pole Gates have five horizontal rails and they have 1 row of vertical spokes.
Lemsco High Pole Gates are 5 feet high when mounted and require no posts.
The overall clearance is 6 feet 10 inches for the standard High Pole and 8 feet 8 inches for horseback.
Lemsco High Pole Gates come with 30 inches of chain attched and a chain latch.
Primary use is for gates in corrals and penning with low pressure from cattle or horses.
One of the more common uses is in low cost roping arenas.
All High Pole Gates are all coated with our unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions.
Call for pricing.